««« Chemicals

Residential Wood Floor Care

WOOD FLOOR PREP CLEANER

This multipurpose cleaning agent can be used for regular cleaning and maintenance of all sealed and finished wood floors. It will remove soil build-up without leaving a film typical of other cleaners. This cleaning product is essential for use before refinishing with AquaCoat residential Wood Floor Matte Finish restorer or AquaCoat Plus Emulsion Glossy Finish for fine wood floors.

Recommended Applications
General maintenance cleaning
Floor prep cleaning and abrasion for finish application 		Approved Applications
For wood floors with water based seals and finishes
For wood floors with solvent based seals and finishes
For wood floors with oil modified based seals and finishes

General Usage
1:2 - 16 		pH
Concentrated 7.5 - 8.0
Ready To Use 7.5 - 8.0 		Part Number
9661000 - Gallons
9664000 - 4 Gallon Cases

AQUACOAT RESIDENTIAL WOOD FLOOR SATIN FINISH RESTORER & SEMI GLOSS FINISH

This product will provide a beautiful refinish to your customers fine wood floors. It contains 40% more active ingredients than the competitions matte finish for a stronger, more durable protection. This product also works great for restring the finish to water and smoke damaged wood furniture. The 1-2 punch of Wood Floor Prep Cleaner and AquaCoat Matte Finish Restorer will successfully complete and refinish 90% of the residential wood floors you encounter.

Recommended Applications
Cleaning and finish restoration 		Approved Applications
For wood floors with water based seals and finishes
For wood floors with solvent based seals and finishes
For wood floors with oil modified based seals and finishes

General Usage
Straight, 800-1000 sq. ft. per gallon 		pH
Concentrated 8.5 - 9.0
Ready To Use 8.5 - 9.0 		Part Number
9671000 - Gallons - Satin
9674000 - 4 Gallon Cases - Satin
9641000 - Gallons - Semi Gloss
9644000 - 4 Gallon Cases - Semi Gloss

AQUACOAT PLUS GLOSSY        EMULSION GLOSSY FINISH FOR FINE WOOD FLOORS

AquaCoat Plus is designed to renovate severely soiled floors that need a complete reglossed finish due to damage from pain, wear, and other spilled materials. It can completely finish a bare residential wood floor. When used in conjunction with the available catalyst, it can finish or refinish commercial gym floors without the use of solvents. AquaCoat Plus can be applied as a first finish to new or newly sanded floors and can be applied over properly prepared solvent coatings.

Recommended Applications
Cleaning, grit screen sanding, and finish renovation
Finishing bare wood floors
Renovating finish of wood floors damaged by paint and other spilled materials 		Approved Applications
For wood floors with water based seals and finishes
For wood floors with solvent based seals and finishes
For wood floors with oil modified based seals and finishes

General Usage
Straight, 1000-1500 sq. ft. per gallon 		pH
Concentrated 8.5 - 9.0
Ready To Use 8.5 - 9.0 		Part Number
9681000 - Gallons
9684000 - 4 Gallon Cases

Procedures

WOOD FLOOR FINISH RESTORATION

For Cleaning and Floor Preparation -

Mix 12 ounces WOOD FLOOR PREP CLEANER with 1 gallon of water (for heavy soiling use 16 ounces of cleaner). Apply mixed solution to the floor. Agitate with a (175 - 300 rpm) low speed rotary floor machine using a maroon pad or equivalent. For best results, place a white buffing pad between the maroon pad and the floor machine driver block. Mop the floor with a tac rag, cotton towel, or absorbent bonnet pad. Repeat procedures if necessary. Pay particular attention to edges of room, where some cleaning and wiping by hand may be necessary.

For Finish Restoration

Use AQUACOAT RESIDENTIAL MATTE FINISH RESTORER straight. Pour out in straight line. Normal coverage is 800 - 1000 square feet per gallon. Spread the finish out evenly with finish applicator or lambs wool applicator. Continue to pour and spread the product until an even coating has been applied over the area. Allow at least 30 minutes drying time, then apply a second coat of finish.

WOOD FLOOR FINISH RENOVATION

For Cleaning and Floor Preparation

Mix 16 ounces WOOD FLOOR PREP CLEANER with 1 gallon of water. Agitate with a (175 - 300 rpm) low speed rotary floor machine using a maroon pad or equivalent. For best results, place a white buffing pad between the maroon pad and the floor machine driver block. Mop the floor with a tac rag, cotton towel, or absorbent bonnet pad. Apply 120 grit screen to driver block of floor machine. Thoroughly agitate floor with grit screen. Pick up dust and debris with wet/dry shop vacuum. Mop the floor with cleaner and tac rag, cotton towel, or bonnet pad. Repeat dust removal procedures if necessary.

For Finish Renovation

Use AQUACOAT PLUS FLOOR FINISH straight. Pour out in straight line. Normal coverage is 1000 - 1500 square feet per gallon. Spread the finish out evenly with finish applicator or lambs wool applicator. Continue to pour and spread the product until an even coating has been applied over the area. Allow at least 30 minutes drying time, then apply a second coat or finish.

WOOD FLOOR MAINTENANCE CLEANING

Mix 2 ounces WOOD FLOOR PREP CLEANER with 1 gallon of water. Mop with tac rag or absorbent cotton towels. You may also use a low speed rotary floor machine with an absorbent bonnet pad for agitation, cleaning and buffing.

Accessories

MAROON SCRUBBING PAD

For floor cleaning and creating abrasion on surface for finish adherence.
part number R9706-1 single
R9706 case of 10

GRIT SCREEN

For minor sanding, paint removal and removal of previous finish. (120 grit screen)
part number R9710-1 single
R9710 case of 10

BONNET PAD

For cleaning, drying and buffing.
part number 4840021 21" Bonnet Pad

LIGHTWEIGHT APPLICATOR BAR

For finish application. Uses 18" applicator bar pad with woven pad.
part number R9703 Applicator Bar
R9705 18" Woven Applicator Bar Pad
4807100-2 Wood Extension Pole